Shelly Qubino Wave Shutter dual channel Z-Wave relay module for shades

The Shelly Wave Shutter is a smart relay module with a 230V AC power meter, part of the Shelly Wave family of products that uses the Z-Wave protocol for communication (868.42 MHz in Europe). As Z-Wave is a smart home protocol, it is specifically designed for communication between smart devices. The sub-GHz frequency results in good signal transmission, and the Z-Wave MESH network topology allows devices that are remote from the central unit to communicate efficiently with each other (devices with uninterruptible power supply act as signal repeaters). A Z-Wave Hub or USB coordinator (e.g. connected to a mini PC) is required for Z-Wave devices to work. The Z-Wave protocol uses merged command classes, which allows compatibility of thousands of products from different brands to work together in a network. Up to 232 devices can be in a Z-Wave network. An added benefit of the Z-Wave protocol is the support for Association Groups, which allow direct connections between individual devices within the network. Z-Wave devices can be configured with a number of parameters at protocol level, allowing customisation to even the most specific needs.

It can be used to automate and remotely control the position of roller shutters, blinds, windows, awnings, pool covers and other devices powered by AC bi-directional motors.

Features:
Controlling the angle of the louvre slats
Support for pushbuttons/monostable switches and duplicates (toggle switches)
Measuring energy consumption
Very low power consumption: less than 0.3 W
Z-Wave frequency band: 868.4 MHz (CEPT countries)
The most advanced technology: the Z-Wave 800 Series
Automatic set-up with SmartStart
Security S2 - authentication for the highest level of security
Wireless firmware updates (OTA)
Works with Z-Wave certified gateways and over 4,000 Z-Wave devices

Pairing:

The module has an "S" button, which is a function button for initiating pairing, unpairing and factory reset. These functions are available for a limited time after power is connected.

Pairing/Removal/Factory reset:
Press and hold the "S" button until the LED indicator turns blue. Then press the "S" button again (at least 2 seconds) to start the pairing or unpairing process.

Recommended and tested gateways for Shelly Qubino Wave devices:

• Home Assistant
• Home Centre 3
• Jeedom
• Homey
• SmartThings
• Hubitat

Specifications:

- Output: 2 channels: open/close, 110-230 VAC
- Maximum current: 230V AC 10A (per channel)
- Low standby power: 0.3 W.
- Communication protocol Z-Wave 800
- Z-Wave frequency: 868.4 MHz (EU)
- Range: up to 40 m indoors (walls and floors may reduce range)
- Energy metering: YES
- SmartStart: YES
- S2 encryption: YES
- Z-Wave repeater function: YES
- Wireless firmware updates (OTA): YES
- Operating temperature: -20 to +40 °C
- Dimensions: 37 x 42 x 16 mm
- Weight: 37 g

Installation:

- Normally fits standard installation dosage, but a deep dosage is recommended for faster installation
- DIN rail mounting adapter available (sold separately)

Like other smart relays, it requires the presence of a phase and neutral conductor.