Sonoff NSPanel Pro Wi-Fi + ZigBee Control Panel (Black)

Sonoff NSPanel Pro, released in Q1 2023, is an all-in-one smart home control panel with touchscreen display and built-in Zigbee + Bluetooth smart hub. Lighting, switches, heaters, sockets and plugs - almost all eWeLink smart devices can be controlled from it. The NSPanel Pro is therefore not only a mini wall-mountable tablet, but also includes a built-in standard Zigbee 3.0 bridge function, so you can also use it as a Zigbee gateway. As of firmware version v1.5.6, a Bluetooth (eWeLink-Remote) hub function is also available.

NSPanel Pro is available with a frame in dark grey or white. This is the version with the dark grey frame.

Main features of the Sonoff NSPanel Pro:

Dashboard for managing Wi-Fi eWeLink devices
The NSPanel PRO control panel can be used to manage Wi-Fi smart devices (compatible with the eWeLink app). Up to 3 screens on the NSPanel Pro can display the on/off status of devices, turn them on/off or display data and status of eWeLink sensors.

Control panel for manual eWeLink scenes (scenes)
You can set your favourite eWeLink scenes on the screen for manual start-up, which is also used for group management of multiple devices. With one tap on the NSPanel PRO, you can trigger the desired scene. For example, you can create "I've come home" and "I've left home" scenes to turn off lights or disable/enable specific scenes.

Built-in Zigbee gateway
NSPanel PRO includes an eWeLink compatible Zigbee bridge that works with all Zigbee 3.0 standard eWeLink sensors, switches, relays and sockets. You can start connecting Zigbee devices to NSPanel Pro either via the NSPanel screen or via the eWeLink app. It is compatible with eWeLink Zigbee devices, standard Zigbee 3.0 devices from other manufacturers, as well as Philips Hue and IKEA Zigbee bulbs.

Similar to the Sonoff Zigbee Bridge Pro, the Zigbee Bridge supports three security modes: HOME, DISTANT, SLEEP. The active mode can be set both in the eWeLink application and on the NSPanel Pro screen. You can set which sensors are active in each mode and when the NSPanel PRO triggers a local audible alarm. For example, in HOME mode, only the sensor at the front door should trigger the alarm, in ABSENT mode all motion sensors should trigger the alarm, and in SLEEP mode the sensors in the living room and hallways should trigger the alarm.

Bluetooth gateway
Since firmware version v1.5.6, an eWeLink-Remote (Bluetooth) hub function is also available to connect battery-powered wireless eWeLink-Remote switches (e.g. Sonoff R5 or S-MATE module), and the NSPanel acts as a Bluetooth receiver and hub, allowing management of other WiFi eWeLink devices via the cloud.

Displaying camera videos
NSPanel Pro supports live video display from cameras compatible with the eWeLink app. It also supports RTSP protocol and DIY (ESP32-CAM) cameras that can be added to the NSPanel Pro interface (these cameras are only displayed on the NSPanel, not in the eWeLink application).
NSPanel Pro can thus display an entrance or a specific room as a "video phone". The camera, which supports two-way audio, also allows you to listen to the sound around the camera and talk through the camera speaker.

Intercom: calls between the eWeLink app and NSPanel Pro or between two NSPanel Pro devices
You can voice intercom between multiple NSPanel Pro devices in different rooms or call any NSPanel Pro via the eWeLink app on your phone or tablet.

Energy panel
For eWeLink devices with metered consumption, you can monitor your consumption on the NSPanel Pro display.

Thermostat function
You can create cloud-like thermostat settings in the eWeLink app. Choose a temperature sensor (e.g. Sonoff or SmartWise Zigbee thermometer), connect it to a relay or switch and set automatic or manual control. Heating and cooling modes are available, with a 1-5 °C on/off hysteresis.

Web browser
In the eWeLink app, you can set up any web address and open it on your home screen with a single tap on the 480×480 px, 3.95″ NSPanel Pro screen.

Compatibility and upgrades
NSPanel Pro is compatible with Home Assistant. Support for the Matter protocol will also be added with a firmware upgrade in Q4 2023.

Other features:

• alarm
• timer
• current and 7-day weather forecast (configurable location)
• adjustable volume
• adjustable time to turn off the display
• adjustable screen backgrounds

Hardware features:

• 4.95″ TFT LCD screen with 480×480 px resolution, multi-touch support
• support for 16.7 million colours
• two-way audio support (microphone + speaker)
• built-in light sensor to automatically adjust the brightness of the screen
• 4-core Cortex-A35 processor
• Mali-G31 graphics processing unit (GPU)
• 8 GB eMMC memory
• 2 GB DDR3 RAM
• wall socket mountable (requires phase and zero), also available as a stand for desktop use