Shelly Qubino Wave 2PM dual-channel Z-Wave relay module with energy meter

The Shelly Wave 2PM is a smart relay module with a 230V AC power meter, belonging to the Shelly Wave product family, which uses the Z-Wave protocol for communication (868.42 MHz in Europe). As Z-Wave is a smart home protocol, it is specifically designed for communication between smart devices. The sub-GHz frequency results in good signal transmission, and the Z-Wave MESH network topology allows devices that are remote from the central unit to communicate efficiently with each other (devices with uninterruptible power supply act as signal repeaters). A Z-Wave Hub or USB coordinator (e.g. connected to a mini PC) is required for Z-Wave devices to work. The Z-Wave protocol uses merged command classes, which allows compatibility of thousands of products from different brands to work together in a network. Up to 232 devices can be in a Z-Wave network. An added benefit of the Z-Wave protocol is the support for Association Groups, which allow direct connections between individual devices within the network. Z-Wave devices can be configured with a number of parameters at protocol level, allowing customisation to even the most specific needs.

The Shelly Wave 2PM is a smart relay module that is powered by DC (24-30V DC) or AC (230V AC) and switches the voltage used for power supply at its output terminals. The module is protected against overheating and overload, ensuring safe operation even in small spaces with recessed wall plates.

Pairing:
The module has a function button "S" used to initiate pairing, unpairing and factory reset. These functions are available for a limited time after power is connected.

Pairing/Removal/Factory reset:
press and hold the "S" button until the LED indicator turns blue. Then press the "S" button again (at least 2 seconds) to start the pairing or unpairing process.

Recommended and tested gateways for Shelly Qubino Wave devices:

• Home Assistant
• Home Centre 3
• Jeedom
• Homey
• SmartThings
• Hubitat

Specifications:

- Output: 2 pcs, 110-230 VAC / 24-30 VDC
- Maximum current: 230V AC 16A (ohmic load),
                    30V DC 10A (ohmic load)
- Low standby power: 0.3 W.
- Communication protocol Z-Wave 800
- Z-Wave frequency: 868.4 MHz (EU)
- Range: up to 40 m indoors (walls may reduce range)
- Energy metering: YES
- SmartStart: YES
- S2 encryption: YES
- Z-Wave repeater function: YES
- Wireless updates (OTA): YES
- Operating temperature: -20 to +40 °C
- Dimensions: 37 x 42 x 16 mm
- Weight: 37 g

Installation:

- Normally fits standard installation dosage, but a deep dosage is recommended for faster installation
- DIN rail mounting adapter available (sold separately)

Like other smart relays, it requires the presence of a phase and neutral conductor.