SmartWise WiFi Motor Valve - (dn25)

The motorised valve (DN25 / 1″ inch) for mains water supply is equipped with an eWeLink app-compatible switch connected to a local Wi-Fi router, allowing remote control and automatic operation of the valve with Sonoff / eWeLink automations (scenes) triggered by a flood/leak sensor.

Original price was: 97,55 €.Current price is: 73,16 €.

Out of stock

The SmartWise Single Pipe Smart Motorised Water Valve is a device that allows remote control of the closing and opening of water pipes. Like Sonoff devices, it works with the eWeLink app, so it can be connected to Sonoff / eWeLink automations. It is equipped with a built-in Wi-Fi chip that allows direct connection to your Wi-Fi router, without the need for a smart hub.

Like Sonoff and other SmartWise devices, it is compatible with the free eWeLink app available for Android and iOS smartphones, so it works well with other Sonoff smart devices.

Using an Android or iOS smartphone with an internet connection (Wi-Fi or mobile data), you can remotely open and close it at any time via the eWeLink app, and you can also monitor its current status (open = ON or closed = OFF). Like all other eWeLink devices, it also supports opening/closing by schedule, timer or loop.

You can also set the default state after a power failure (open/closed/pre-failure state) in the eWeLink app.

Sonoff / eWeLink (scene) automations allow automatic water shut-off in the event of an unexpected flood, triggered for example by an alarm from a SmartWise Water Leak Detection Sensor or SmartWise Zigbee Flood Sensor.

The device is powered by the 5V DC power adapter supplied with the product.

The valve operates at a maximum working pressure of 16 bar (at 1-70℃) and is available in DN15 (1/2″), DN20 (3/4″) and DN25 (1″) versions.

Product features:

  • Ball valve: opening/closing
  • Maximum pressure: PN16
  • Water temperature: 1-70℃
  • Diameter: 1″ (DN25)
  • Thread: external-internal or internal-external (installation possible in both directions)
  • Material: connector: bronze, plastic parts: PC/ABS (flame retardant)
  • Power: 5V DC (power supply and cable included)
  • Operating temperature: -20 to 50 ℃
  • Operating humidity: 0%-80% RH


Control:

  • By pressing the ON/OFF button on the motor, or
  • via the internet, from the eWeLink app, or
  • using a schedule/timer/loop set in the eWeLink app (timers are stored on the device and run offline), support up to 8 active timers, or
  • with automations on the eWeLink platform, e.g. when a water leak or flood sensor alarms.